Cui, C.Y., Cui, X.G., Zhang, Y.K., Luo, K.Y., Zhao, Q., Hu, J.D., Liu, Z., Wang, Y.M. (2010) Microstructure and microhardness analysis of the hexagonal oxides formed on the surface of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting. Applied Surface Science, 256. 6782-6786 doi:10.1016/j.apsusc.2010.04.089

See Also

These are possibly similar items as determined by title/reference text matching only.

	Cui, C.Y., Cui, X.G., Ren, X.D., Qi, M.J., Hu, J.D., Wang, Y.M. (2014) Surface oxidation phenomenon and mechanism of AISI 304 stainless steel induced by Nd:YAG pulsed laser. Applied Surface Science, 305. 817-824 doi:10.1016/j.apsusc.2014.04.025
	Cui, Chengyun, Hu, Jiandong, Liu, Yuhua, Guo, Zuoxing (2008) Microstructure evolution on the surface of stainless steel by Nd:YAG pulsed laser irradiation. Applied Surface Science, 254. 3442-3448 doi:10.1016/j.apsusc.2007.11.035
	Cui, Chengyun, Hu, Jiandong, Liu, Yuhua, Gao, Kun, Guo, Zuoxing (2008) Formation of nano-crystalline and amorphous phases on the surface of stainless steel by Nd:YAG pulsed laser irradiation. Applied Surface Science, 254. 6779-6782 doi:10.1016/j.apsusc.2008.04.069
	Cui, Chengyun, Hu, Jiandong, Liu, Yuhua, Gao, Kun, Guo, Zuoxing (2008) Morphological and structural characterizations of different oxides formed on the stainless steel by Nd:YAG pulsed laser irradiation. Applied Surface Science, 254. 6537-6542 doi:10.1016/j.apsusc.2008.04.020
	Cui, X.G., Cui, C.Y., Cheng, X.N., Xu, X.J., Lu, J.Z., Hu, J.D., Wang, Y.M. (2010) Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting. Materials Science and Engineering: A, 527. 7400-7406 doi:10.1016/j.msea.2010.08.008
	Sun, G.F., Zhang, Y.K., Zhang, M.K., Zhou, R., Wang, K., Liu, C.S., Luo, K.Y. (2014) Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr–CrB2. Applied Surface Science, 295. 94-107 doi:10.1016/j.apsusc.2014.01.011
	Cui, C.Y., Xia, C.D., Cui, X.G., Zhou, J.Z., Ren, X.D., Wang, Y.M. (2015) Novel morphologies and growth mechanism of Cr 2 O 3 oxide formed on stainless steel surface via Nd: YAG pulsed laser oxidation. Journal of Alloys and Compounds, 635. 101-106 doi:10.1016/j.jallcom.2015.02.053
	Yang, L.J., Tang, J., Wang, M.L., Wang, Y., Chen, Y.B. (2010) Surface characteristic of stainless steel sheet after pulsed laser forming. Applied Surface Science, 256. 7018-7026 doi:10.1016/j.apsusc.2010.05.017
	Pacquentin, W., Caron, N., Oltra, R. (2015) Effect of microstructure and chemical composition on localized corrosion resistance of a AISI 304L stainless steel after nanopulsed-laser surface melting. Applied Surface Science, 356. 561-573 doi:10.1016/j.apsusc.2015.08.015
	Luo, K.Y., Wang, C.Y., Li, Y.M., Luo, M., Huang, S., Hua, X.J., Lu, J.Z. (2014) Effects of laser shock peening and groove spacing on the wear behavior of non-smooth surface fabricated by laser surface texturing. Applied Surface Science, 313. 600-606 doi:10.1016/j.apsusc.2014.06.029
	Luo, K.Y., Lu, J.Z., Zhang, Y.K., Zhou, J.Z., Zhang, L.F., Dai, F.Z., Zhang, L., Zhong, J.W., Cui, C.Y. (2011) Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel. Materials Science and Engineering: A, 528. 4783-4788 doi:10.1016/j.msea.2011.03.041