Latif, Afiff, Ibrahim, Mohd Rasidi, Mustapa, Mohammad Sukri, Rafai, Noor Hakim, Prakash, Charles (2017) Effect of Variable Pitch on Cutting Temperature, Cutting Forces and Surface Roughness Using Nitico30 Cutting Tool when End Milling of Stainless Steel 316L. Materials Science Forum, 909. 50-55 doi:10.4028/www.scientific.net/msf.909.50

See Also

These are possibly similar items as determined by title/reference text matching only.

	Ibrahim, Mohd Rasidi, Mahadi, Najah, Latif, Afiff, Rahim, Zulafif, Mohid, Zazuli, Mustapa, Mohammad Sukri, Ghani, Saiful Anwar Che (2017) Research on Relationship between Cutting Conditions and Chip Formation during End Milling of Aluminium Alloy 6061. Materials Science Forum, 909. 56-60 doi:10.4028/www.scientific.net/msf.909.56
	Ibrahim, Mohd Rasidi, Sreedharan, Tharmaraj, Fadhlul Hadi, Nurul Aisyah, Mustapa, Mohammad Sukri, Ismail, Al Emran, Hassan, Mohd Fahrul, Tajul Arifin, Ahmad Mubarak (2017) The Effect of Cutting Speed and Feed Rate on Surface Roughness and Tool Wear when Machining Machining D2 Steel. Materials Science Forum, 909. 80-85 doi:10.4028/www.scientific.net/msf.909.80
	Mohd Ali, Afifah, Abdullah, Norazharuddin Shah, Ratnam, Manimaran, Ahmad, Zainal Arifin (2016) The Cutting Speed Influences on Tool Wear of ZTA Ceramic Cutting Tools and Surface Roughness of Work Material Stainless Steel 316L during High Speed Machining. Materials Science Forum, 840. 315-320 doi:10.4028/www.scientific.net/msf.840.315
	Kuddus, Suriyanti, Mustapa, Mohammad Sukri, Ibrahim, Mohd Rasidi, Shamsudin, Shazarel, Ab Kadir, Muhammad Irfan, Lajis, Mohd Amri (2017) Microstructures and Tensile Characteristics on Direct Recycled Aluminium Chips AA6061/Al Powder by Hot Pressing Method. Materials Science Forum, 909. 9-14 doi:10.4028/www.scientific.net/msf.909.9
	Mahdi, Ahmed Sahib, Mustapa, Mohammad Sukri, Yunus, Mohd Radzi Mohamed, Ibrahim, Mohd Rasidi, Ab Kadir, Muhammad Irfan, Ab Rashid, Mohd Warikh (2017) Abrasive Wear on Heat-Treated Recycling Aluminium AA6061 of Various Reinforcement Materials through Powder Metallurgical Process. Materials Science Forum, 909. 15-20 doi:10.4028/www.scientific.net/msf.909.15
	Wang, Jian Lu, Wu, Liang Liang, Zhang, Jun, Zhao, Wan Hua, Jiang, Yi Fei, Shui, Yan (2012) Research on the Cutting Fluid Effect on Cutting Force and Surface Roughness in Rotor Milling. Materials Science Forum, 723. 50-55 doi:10.4028/www.scientific.net/msf.723.50
	Ozcatalbas, Yusuf, Bahceci, Ersin, Turker, Mehmet (2007) Effect of Cutting Tool Materials on Surface Roughness and Cutting Forces in Machining of Al-Si3N4 Composite Produced by Powder Metallurgy. Materials Science Forum, 534. 869-872 doi:10.4028/www.scientific.net/msf.534-536.869
	Ibrahim, Mohd Rasidi, Ahmad, Aishah, Ibrahim, Azrin, Samsudin, Noor Azah, Mustapa, Mohammad Sukri, Cheng, Kai, Chong, Bin Hong (2023) An Effectiveness in Manufacturing Quality on Surface Roughness and Built-Up Edge in Drilling Operation towards Aircraft Component. Materials Science Forum, 1110. 67-73 doi:10.4028/p-v74xyf
	Hosni, Nor Ain Jamil, Lajis, Mohd Amri, Rafai, Noor Hakim (2014) Tool Life and Flank Wear of Physical Vapour Deposited TiAlN Multilayer Coated Carbide End Mill Inserts when Machining AISI D2 Hardened Steel under Dry Cutting Condition. Advanced Materials Research, 903. 9-14 doi:10.4028/www.scientific.net/amr.903.9
	Ge, Ying Fei, Huan, Hai Xiang, Xu, Jiu Hua (2016) Cutting Temperature and Cutting Forces Investigation Based on the Taguchi Design Method when High-Speed Milling of Titanium Matrix Composites with PCD Tool. Materials Science Forum, 836. 168-174 doi:10.4028/www.scientific.net/msf.836-837.168
	Noordin, Mohd Yusof, Davoudinejad, Ali, Shaari, Mohd Rosmaini (2012) Effect of Tool Edge Geometry on Cutting Force and Surface Roughness when Hard Turning Tool Steel. Advanced Materials Research, 505. 15-19 doi:10.4028/www.scientific.net/amr.505.15