Bouacha, Khaider, Yallese, Mohamed Athmane, Mabrouki, Tarek, Rigal, Jean-François (2010) Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. International Journal of Refractory Metals and Hard Materials, 28 (3). 349-361 doi:10.1016/j.ijrmhm.2009.11.011

See Also

These are possibly similar items as determined by title/reference text matching only.

	Bouacha, Khaider, Yallese, Mohamed Athmane, Khamel, Samir, Belhadi, Salim (2014) Analysis and optimization of hard turning operation using cubic boron nitride tool. International Journal of Refractory Metals and Hard Materials, 45. 160-178 doi:10.1016/j.ijrmhm.2014.04.014
	Sahin, Y., Motorcu, A.R. (2008) Surface roughness model in machining hardened steel with cubic boron nitride cutting tool. International Journal of Refractory Metals and Hard Materials, 26 (2). 84-90 doi:10.1016/j.ijrmhm.2007.02.005
	Mandal, Nilrudra, Doloi, B., Mondal, B. (2013) Predictive modeling of surface roughness in high speed machining of AISI 4340 steel using yttria stabilized zirconia toughened alumina turning insert. International Journal of Refractory Metals and Hard Materials, 38. 40-46 doi:10.1016/j.ijrmhm.2012.12.007
	Laouissi, Aissa; Atmani, Djamila; Guendouz, Hassan; Safi, Khaoula; Djermoune, Atmane; Yallese, Mohamed Athmane (2026) Wear behavior of uncoated and coated Si₃N₄-based ceramic tool, and their effect on surface integrity in dry machining of gray cast iron. International Journal of Refractory Metals and Hard Materials, 135. doi:10.1016/j.ijrmhm.2025.107527
	Mandal, Nilrudra, Doloi, B., Mondal, B. (2011) Development of flank wear prediction model of Zirconia Toughened Alumina (ZTA) cutting tool using response surface methodology. International Journal of Refractory Metals and Hard Materials, 29 (2). 273-280 doi:10.1016/j.ijrmhm.2010.12.001
	Maňková, Ildikó, Vrabeľ, Marek, Beňo, Jozef, Franková, Mária (2016) Modelling and Analysis of Relationship between Cutting Parameters Surface Roughness and Cutting Forces Using Response Surface Methodology when Hard Turning with Coated Ceramic Inserts. Key Engineering Materials, 686. 19-26 doi:10.4028/www.scientific.net/kem.686.19
	Hardell, J., Prakash, B. (2010) Tribological performance of surface engineered tool steel at elevated temperatures. International Journal of Refractory Metals and Hard Materials, 28 (1). 106-114 doi:10.1016/j.ijrmhm.2009.07.009
	Paiva, A.P., Campos, P.H., Ferreira, J.R., Lopes, L.G.D., Paiva, E.J., Balestrassi, P.P. (2012) A multivariate robust parameter design approach for optimization of AISI 52100 hardened steel turning with wiper mixed ceramic tool. International Journal of Refractory Metals and Hard Materials, 30 (1). 152-163 doi:10.1016/j.ijrmhm.2011.08.001
	Gaitonde, V.N., Karnik, S.R., Figueira, Luis, Paulo Davim, J. (2009) Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts. International Journal of Refractory Metals and Hard Materials, 27 (4). 754-763 doi:10.1016/j.ijrmhm.2008.12.007
	RAFIGHI, MOHAMMAD, ÖZDEMIR, MUSTAFA, ŞAHINOĞLU, ABIDIN, KUMAR, RAMANUJ, DAS, SUDHANSU RANJAN (2022) EXPERIMENTAL ASSESSMENT AND TOPSIS OPTIMIZATION OF CUTTING FORCE, SURFACE ROUGHNESS, AND SOUND INTENSITY IN HARD TURNING OF AISI 52100 STEEL. Surface Review and Letters, 29 (11) doi:10.1142/s0218625x22501505
	Sarjana, S.S., Bencheikh, I., Nouari, M., Ginting, A. (2020) Study on cutting performance of cermet tool in turning of hardened alloy steel. International Journal of Refractory Metals and Hard Materials, 91. 105255pp. doi:10.1016/j.ijrmhm.2020.105255