Anindya, A., Swinbourne, D. R., Reuter, M. A., Matusewicz, R. W. (2013) Distribution of elements between copper and FeOx–CaO–SiO2slags during pyrometallurgical processing of WEEE. Mineral Processing and Extractive Metallurgy, 122 (3). 165-173 doi:10.1179/1743285513y.0000000043

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	Anindya A. 2012. Minor elements distribution during the smelting of WEEE with copper scrap, PhD thesis (unpublished), RMIT University, Melbourne, Australia.
	Anindya A, Swinbourne DR, Reuter MA and Matusewicz R. 2009. Tin distribution during smelting of WEEE with copper scrap, European Metallurgical Congress 2009, (ed. Harre J), 555–568, GDMB-Informationsges, Clausthal-Zellerfeld.
	Antrekowitsch H (2006) EPD Congress 2006 , 899
	Aurubis. 2013. Recycling technology – Aurubis’ multi-metal recycling, http://www.aurubis.com/en/our-business/raw-materials/recycling/technology (accessed on 4 January 2013).
	Not Yet Imported: Canadian Metallurgical Quarterly - journal-article : 10.1179/cmq.1976.15.2.111 If you would like this item imported into the Digital Library, please contact us quoting Journal ID 11983
	Bale, C.W., Chartrand, P., Degterov, S.A., Eriksson, G., Hack, K., Ben Mahfoud, R., Melançon, J., Pelton, A.D., Petersen, S. (2002) FactSage thermochemical software and databases. Calphad, 26 (2) 189-228 doi:10.1016/s0364-5916(02)00035-4
	Cui, Jirang, Forssberg, Eric (2003) Mechanical recycling of waste electric and electronic equipment: a review. Journal of Hazardous Materials, 99. 243-263 doi:10.1016/s0304-3894(03)00061-x
	E-wasteguide.info. 2009. Material composition, http://ewasteguide.info/node/4074, (accessed 14 December 2012).
	Gortais, J., Hodaj, F., Allibert, M., Welter, J. M. (1994) Equilibrium distribution of Fe, Ni, Sb, and Sn between liquid Cu and a CaO-rich slag. Metallurgical and Materials Transactions B, 25 (5). 645-651 doi:10.1007/bf02655172
	Hager, John P., Howard, Stanley M., Jones, John H. (1970) Thermodynamic properties of the Cu−Sn and Cu−Au systems by mass spectrometry. Metallurgical and Materials Transactions B, 1 (2). 415-422 doi:10.1007/bf02811550
	Hagelüken C. 2005. Recycling of electronic scrap at Umicore's integrated metals smelter and refinery, in European Metallurgical Congress 2005, (ed. Waschki U), 307–324, GDMB-Informationsges, Clausthal-Zellerfeld.
	Hagelüken C and Kerckhoven TV. 2006. Coping with challenges in WEEE - Recycling by using state-of-art smelting and refining processes, Proc. 5th Int. Electronics Recycling Congress, Hamburg, January 2006.
	Hultgren R, Desai PD, Hawkins DTet al. 1973. Selected values of the thermodynamic properties of binary alloys, 795–800, Ohio, American Society for Metals.
	Juckes, L. M. (2002) Dicalcium silicate in blast-furnace slag: a critical review of the implications for aggregate stability. Mineral Processing and Extractive Metallurgy, 111 (3). 120-128 doi:10.1179/037195502766647039
	Kongoli F (2006) Sohn Int. Symp. Advanced Processing of Metals & Materials , 69
	Kuehr R. 2010. E-waste: not your normal trash, http://ourworld.unu.edu/en/e-waste-not-your-normal-trash/# (accessed 10 December 2012).
	Lehner T. 2011. Boliden AB, Ronnskar, Sweden, Personal communication, 13 September 2011.
	LME. 2012. LME tin, http://www.lme.com/tin.asp (accessed on 9 December 2012).
	Louey R (1999) Proc. AusIMM 304, 31
	Nagamori, M., Mackey, P. J. (1977) Distribution equilibria of Sn, Se and Te between FeO-Fe2O3-SiO2-AI2O3-CuO0.5 slag and metallic copper. Metallurgical Transactions B, 8 (1). 39-46 doi:10.1007/bf02656349
	Nikolic S (2008) Metall. Mater. Trans. B
	Not Yet Imported: Filtration Industry Analyst - journal-article : 10.1016/S1365-6937(12)70257-5 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Pink B. 2010. Australia’s environment: issues and trends 2010, Australian Bureau of Statistics, Cat. no. 4613·0, 58.
	Rankin WJ. 2011. Minerals, metals and sustainability – Meeting future material needs, Melbourne, CSIRO Publishing, 189–213.
	Rentz O, Krippner M, Hähre S and Schultmann F. 1999. Best available techniques (BAT) in copper production, French-German Institute for Environmental Research, University of Karlsruhe, Germany.
	Not Yet Imported: MRS Bulletin - journal-article : 10.1557/mrs.2012.57 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Waste Electrical and Electronic Equipment (WEEE) Handbook - book-chapter : 10.1533/9780857096333.2.163 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Sigworth, G.K., Elliott, J.F. (1974) The thermodynamics of dilute liquid copper alloys. Canadian Metallurgical Quarterly, 13. 455-461 doi:10.1179/cmq.1974.13.3.455
	Takeda, Yoichi, Ishiwata, Shoji, Yazawa, Akira (1983) Distribution Equilibria of Minor Elements between Liquid Copper and Calcium Ferrite Slag. Transactions of the Japan Institute of Metals, 24. 518-528 doi:10.2320/matertrans1960.24.518
	Takeda Y (1989) Productivity and technology in the metallurgical industries , 227
	US Geological Survey. 2012. Minerals information: tin. http://minerals.usgs.gov/minerals/pubs/commodity/tin/ (accessed on 12 January 2013).
	Not Yet Imported: Environmental Impact Assessment Review - journal-article : 10.1016/j.eiar.2005.04.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID 21196
	Woerz H (1988) World survey of nonferrous smelters , 281
	Wood J, Creedy S, Matusewicz R and Reuter MA. 2011. Secondary copper processing using Outotec Ausmelt TSL technology, in Proceedings of MetPlant 2011, 460–467, The Australasian Institute of Mining & Metallurgy: Carlton South.
	Yazawa A (1994) Pyrometallurgy for complex materials and wastes , 61

See Also

These are possibly similar items as determined by title/reference text matching only.

	Anindya, A., Swinbourne, D. R., Reuter, M. A., Matusewicz, R. W. (2014) Distribution of elements between copper and FeOx–CaO–SiO2slags during pyroprocessing of WEEE: Part 2 – indium. Mineral Processing and Extractive Metallurgy, 123 (1). 43-52 doi:10.1179/1743285513y.0000000047
	Paulina, L, Swinbourne, D R, Kho, T S (2013) Distribution of bismuth between copper and FeOx–CaO–SiO2slags under copper converting conditions. Mineral Processing and Extractive Metallurgy, 122 (2). 79-86 doi:10.1179/1743285512y.0000000033
	Hoang, G. B., Swinbourne, D. R. (2007) Indium distribution between FeO–CaO–SiO2slags and lead bullion at 1200°C. Mineral Processing and Extractive Metallurgy, 116 (2). 133-138 doi:10.1179/174328507x163850
	Hara, Y. S. R., Jha, A. (2013) Carbothermic reduction of Zambian sulphide concentrates in presence of lime. Mineral Processing and Extractive Metallurgy, 122 (3). 146-156 doi:10.1179/1743285513y.0000000041
	Ifill, R. O., Etsell, T. H. (2013) Enhanced settling of fine silica by direct AC electrocoagulation. Mineral Processing and Extractive Metallurgy, 122 (3). 137-145 doi:10.1179/1743285513y.0000000037
	Coetsee, T, Naudé, G, Richards, J, Walliser, A, Bessinger, D (2013) Sinter formation in zinc roasting. Mineral Processing and Extractive Metallurgy, 122 (2). 122-128 doi:10.1179/1743285513y.0000000040
	Swinbourne, Doug (2010) The extractive metallurgy of lead. Mineral Processing and Extractive Metallurgy, 119 (3). 182 doi:10.1179/037195510x12804985731362
	Zhu, P., Cao, Z. B., Chen, Y., Qian, G. R., Lu, B., Zhou, M., Zhou, J. (2013) Hydrometallurgical process for separation and recovery of product from serpentine waste. Mineral Processing and Extractive Metallurgy, 122 (3). 157-164 doi:10.1179/1743285513y.0000000042
	Yan, S., Swinbourne, D. R. (2003) Distribution of germanium under lead smelting conditions. Mineral Processing and Extractive Metallurgy, 112 (2). 75-80 doi:10.1179/037195503225002763
	Rhamdhani, M A, Dewan, M A, Brooks, G A, Monaghan, B J, Prentice, L (2013) Alternative Al production methods. Mineral Processing and Extractive Metallurgy, 122 (2). 87-104 doi:10.1179/1743285513y.0000000036
	Dewan, M A, Rhamdhani, M A, Brooks, G A, Monaghan, B J, Prentice, L (2013) Alternative Al production methods. Mineral Processing and Extractive Metallurgy, 122 (2). 113-121 doi:10.1179/1743285513y.0000000039