Lin, Ben; Li, Ying; Li, Xiwu; Zhang, Yongan; Wen, Kai; Li, Changlin; Yan, Lizhen; Li, Yanan; Yan, Hongwei; Li, Zhihui; et al. (2026) Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Friction-Stir-Welded Al–Cu–Li Alloy. Metals, 16 (5). doi:10.3390/met16050556

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	Not Yet Imported: - journal-article : 10.1016/j.actamat.2003.08.023 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Zeng, Xiaopeng, Wu, Guohua, Tong, Xin, Li, Liangbin, Xiong, Xunman, Zhang, Liang, Qi, Fangzhou, Xu, Xuanxi, Guo, Youjie (2024) Optimizing recrystallization behavior induced by Mn micro-alloying for reduced anisotropy in rolled Al–Cu–Li alloys. Materials Science and Engineering: A, 909. 146831 doi:10.1016/j.msea.2024.146831
	Not Yet Imported: Progress in Aerospace Sciences - journal-article : 10.1016/j.paerosci.2014.03.003 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Xu (2024) Int. J. Plast. Achieving superior strength-ductility balance by tailoring dislocation density and shearable GP zone of extruded Al-Cu-Li alloy 182, 104135
	Gupta, R.K., Nayan, Niraj, Nagasireesha, G., Sharma, S.C. (2006) Development and characterization of Al–Li alloys. Materials Science and Engineering: A, 420. 228-234 doi:10.1016/j.msea.2006.01.045
	Not Yet Imported: Acta Materialia - journal-article : 10.1016/j.actamat.2019.04.030 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Rioja, Roberto J., Liu, John (2012) The Evolution of Al-Li Base Products for Aerospace and Space Applications. Metallurgical and Materials Transactions A, 43 (9). 3325-3337 doi:10.1007/s11661-012-1155-z
	Not Yet Imported: - journal-article : 10.1016/j.vacuum.2022.111333 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: International Journal of Fatigue - journal-article : 10.1016/j.ijfatigue.2021.106671 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmrt.2023.02.206 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jare.2017.12.004 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Lee, M. F., Huang, J. C., Ho, N. J. (1996) Microstructural and mechanical characterization of laser-beam welding of a 8090 Al-Li thin sheet. Journal of Materials Science, 31. 1455-1468 doi:10.1007/bf00357853
	Not Yet Imported: - journal-article : 10.3390/ma17030657 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmapro.2022.12.002 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.optlastec.2021.107019 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1007/s00170-017-1197-x If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmapro.2023.02.007 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Li, Q., Wang, Q., Xu, Y., Sun, P., Wang, K., Tong, X., Wu, G., Zhang, L., Xu, Y., and Ding, W. (2026). Welding of advanced aluminum–lithium alloys: Weldability, processing technologies, and grain structure control. Materials, 19.
	Not Yet Imported: - journal-article : 10.1016/j.cja.2023.10.017 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Feddal, Ikram; Chairi, Mohamed; Di Bella, Guido (2025) Analysis of Friction Stir Welding of Aluminum Alloys. Metals, 15 (5). doi:10.3390/met15050532
	Yadav (2025) Mater. Today Commun. Determination of local constitutive behavior in friction stirred Al–Cu-Li alloy 46, 112887
	Wu (2025) J. Mater. Eng. Perform. Characteristics and mechanism of ultrasonic-assisted friction stir welding of aluminum lithium alloy 35, 10697
	Peng, Chen, Jing, Chen, Siyi, Qin, Siqi, Zou, Shoubo, Song, Ting, Jiang, Zhiqing, Zhang, Zhihong, Jia, Qing, Liu (2021) Friction stir welding joints of 2195-T8 Al–Li alloys: Correlation of temperature evolution, microstructure and mechanical properties. Materials Science and Engineering: A, 823. 141501pp. doi:10.1016/j.msea.2021.141501
	Kesharwani, Guru Sewak, Billa, Kiran Kumar, Verma, Juhi, Garg, Shrwan Kumar, Katiyar, Jitendra Kumar, Kumar, Sanjeev (2024) Influence of tool velocity ratio on force-torque and mechanical properties of friction stir welded 2050-T84 Al-Li alloy plates. Physica Scripta, 99 (7) 75008 doi:10.1088/1402-4896/ad505f
	DAI, Xiang, SHI, Lei, TIAN, Chun-yan, WU, Chuan-song, GAO, Song (2024) Effect of ultrasonic vibration on microstructures and mechanical properties of friction stir welded 2195 Al−Li alloy. Transactions of Nonferrous Metals Society of China, 34 (1) 80-93 doi:10.1016/s1003-6326(23)66383-6
	Lu (2025) J. Braz. Soc. Mech. Sci. Eng. Prediction of the temperature distribution during friction stir welding 2195 Al–Li alloys 48, 49
	Lyu (2024) J. Mater. Res. Technol. Elucidating the influence mechanisms of splat cooling on microstructure evolution in friction stir welding of 2195 Al–Li alloy by multi-scale simulation 31, 2636
	Lyu (2024) J. Manuf. Process. Revealing the mechanism of superimposing ultrasonic vibration on microstructure evolution in friction stir welding by multi-physical multi-scale simulation 124, 300
	Tong (2025) Mater. Charact. Friction stir welding of 2195 Al–Li alloy: Effect of microstructure on joint failure 224, 115077
	Thomas (2025) Mater. Res. Express Microstructural analysis and process parameter optimization of friction stir-welded AA8090 alloys for enhanced tensile strength 12, 106509
	Shao (2025) J. Alloys Compd. Microstructural evolution, deformation behaviour and corrosion properties of 2195 Al–Li alloy friction stir welding T-junction 1012, 178504
	Chen (2025) Mater. Charact. Enhancing mechanical properties of friction stir welded 2195-O Al–Li alloys by post-weld heat treatment 227, 115219
	Wang (2024) Mater. Charact. Effect of temperature on creep aging behavior of the nugget zone of AA2195 Al–Li alloy produced by friction stir welding 217, 114408
	Chen, Peng, Wang, Jie, Liu, Ge, Chen, Wenhao, Tang, Yang, Huang, Bensheng, Zhang, Zhiqing (2024) Influence of post-weld rolling and artificial aging on microstructure and mechanical properties of friction stir welded 2195-T4 Al-Li alloy joints. Materials Science and Engineering: A, 914. doi:10.1016/j.msea.2024.147165
	Not Yet Imported: - journal-article : 10.1016/j.jmrt.2024.03.009 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	(2022). Standard Test Method for Microindentation Hardness of Materials (Standard No. ASTM E384-22).
	(2004). Standard Test Methods for Tension Testing of Metallic Materials (Standard No. ASTM E8-04).
	Not Yet Imported: - journal-article : 10.1016/j.scriptamat.2007.09.052 If you would like this item imported into the Digital Library, please contact us quoting Journal ID

See Also

These are possibly similar items as determined by title/reference text matching only.

	Gao, Xinyu; Gao, Guanjun; Wen, Kai; Li, Zhihui; Yan, Lizhen; Li, Xiwu; Yan, Hongwei; Hu, Tianlong; Chen, Lei; Zhang, Yongan; et al. (2026) Influence of Annealing Cooling Method Prior to Final Cold Drawing on the Microstructure and Mechanical Properties of Al–Zn–Mg–Cu Alloy Wire. Metals, 16 (5). doi:10.3390/met16050495
	Li, Ying, Li, Xiwu, He, Changshu, Wen, Kai, Li, Yanan, Yan, Lizhen, Zhang, Yongan, Xiong, Baiqing (2024) Effects of processing parameters on microstructure and mechanical properties of friction stir additive manufactured Al-Zn-Mg-Cu alloy. Journal of Physics: Conference Series, 2873 (1). doi:10.1088/1742-6596/2873/1/012005
	Li, Ganghui, Xiao, Wei, Li, Xiwu, Wen, Kai, Gao, Guanjun, Yan, Lizhen, Li, Yanan, Yan, Hongwei, Zhang, Yongan, Wang, Xingquan, Xiong, Baiqing (2024) The Influence of Aging Precipitates on the Mechanical Properties of Al–Li Alloys and Microstructural Analysis. Metals, 14 (5) 506 doi:10.3390/met14050506
	Wang, Tao, Wen, Kai, Lin, Ben, Li, Xiwu, Li, Yanan, Li, Zhihui, Zhang, Yongan, Xiong, Baiqing (2023) Influence of Cryogenic Temperatures on the Mechanical Properties and Microstructure of 2195-T8 Alloy. Metals, 13 (4) 740 doi:10.3390/met13040740
	Li, Ganghui, Xiao, Wei, Li, Xiwu, Li, Ying, Yan, Lizhen, Li, Yanan, Wen, Kai, Yan, Hongwei, Zhang, Yongan, Wang, Xingquan, et al. (2024) Atomic insights for elevated modulus in Al–Li alloys: synergies and design strategy. Journal of Materials Science, 59 (40). doi:10.1007/s10853-024-09844-6
	Xue, Boyu; Liu, Qilong; Xiao, Wei; Li, Xiwu; Gao, Guanjun; Yan, Hongwei; Wen, Kai; Li, Xiaowu; Zhang, Yongan; Wang, Ligen; et al. (2026) Influence of Ga Content and Pre-Treatment on the Mechanical Properties of High-Mg-Content Al-Mg-Zn-Ga Alloys. Metals, 16 (2). doi:10.3390/met16020196
	Wen, Kai, Xiong, Baiqing, Zhang, Yongan, Li, Zhihui, Li, Xiwu, Huang, Shuhui, Yan, Lizhen, Yan, Hongwei, Liu, Hongwei (2018) Effect of Various Retrogression Regimes on Aging Behavior and Precipitates Characterization of a High Zn-Containing Al–Zn–Mg–Cu Alloy. Metals and Materials International, 24. 537-548 doi:10.1007/s12540-018-0077-8
	Wen, Kai, Xiong, Baiqing, Zhang, Yongan, Li, Zhihui, Li, Xiwu, Yan, Lizhen, Yan, Hongwei, Liu, Hongwei (2021) Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy. Metals and Materials International, 27 (5) 779-795 doi:10.1007/s12540-019-00446-5
	Yu, Mingyang, Zhang, Yong'an, Li, Xiwu, Wen, Kai, Xiong, Baiqing, Li, Zhihui, Yan, Lizhen, Yan, Hongwei, Liu, Hongwei, Li, Ya'nan (2020) Effect of recrystallization on plasticity, fracture toughness and stress corrosion cracking of a high-alloying Al-Zn-Mg-Cu alloy. Materials Letters, 275. 128074pp. doi:10.1016/j.matlet.2020.128074
	Li, Ying, Yu, Mingyang, Xiao, Wei, Li, Yanan, Yan, Lizhen, Yu, Rui, Li, Xiwu, Li, Zhihui, Zhang, Yongan, Xiong, Baiqing (2024) Experimental Characterization and First-Principles Calculations of Zn Segregation at the β″-Mg5Al2Si4/Al Interfaces in Al-Mg-Si Alloys. Metals, 14 (8). doi:10.3390/met14080933
	Jing, Lyu; Ying, Li; Xiwu, Li; Lizhen, Yan; Yanan, Li; Bingshan, Deng; Yongan, Zhang; Zhihui, Li; Baiqing, Xiong (2026) Orthogonal design of duplex aging to tailor precipitation for superior strength-ductility balance in an ultra-high-strength Al-Cu-Li alloy. Materials Science and Engineering: A, 965. doi:10.1016/j.msea.2026.150314