Imamura, Takeshi; Takayama, Yoshimasa (2025) Effect of Cold Rolling Reduction on Development of Recrystallization Texture of 3 Pct Si Steel Sheet. Metallurgical and Materials Transactions A, 56 (11). doi:10.1007/s11661-025-07965-4

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	H. Katoh, H. Takechi, and S. Nagashima: J. Jpn. Soc. Technol. Plast., 1966, vol. 7, p. 13.
	Not Yet Imported: - journal-article : 10.2355/isijinternational.37.706 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Hutchinson, W. Bevis (1994) Practical Aspects of Texture Control in Low Carbon Steels. Materials Science Forum, 157. 1917-1928 doi:10.4028/www.scientific.net/msf.157-162.1917
	Malta, Paula Oliveira, Alves, Davi Silva, Ferreira, Aline Oliveira Vasconcelos, Moutinho, Iane Dutra, Dias, Carolina Arriel Pedroso, Santos, Dagoberto Brandão (2017) Static Recrystallization Kinetics and Crystallographic Texture of Nb-Stabilized Ferritic Stainless Steel Based on Orientation Imaging Microscopy. Metallurgical and Materials Transactions A, 48 (3). 1288-1309 doi:10.1007/s11661-016-3935-3
	Stockemer, Joëlle, Vanden Brande, Pierre, Brande, Pierre Vanden (2003) Recrystallization of a cold-rolled low-carbon steel by cold-plasma-discharge rapid annealing. Metallurgical and Materials Transactions A, 34 (6). 1341-1348 doi:10.1007/s11661-003-0245-3
	Mehdi, Mehdi, He, Youliang, Hilinski, Erik J., Edrisy, Afsaneh (2019) Texture Evolution of a 2.8 Wt Pct Si Non-oriented Electrical Steel and the Elimination of the 〈111〉//ND Texture. Metallurgical and Materials Transactions A, 50 (7). 3343-3357 doi:10.1007/s11661-019-05239-4
	Not Yet Imported: - journal-article : 10.1016/S1359-6454(96)00251-0 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Yoshitomi, Y., Ushigami, Y., Harase, J., Nakayama, T., Masui, H., Takahashi, N. (1994) Coincidence grain boundary and role of primary recrystallized grain growth on secondary recrystallization texture evolution in Fe3%Si alloy. Acta Metallurgica et Materialia, 42 (8). 2593-2602 doi:10.1016/0956-7151(94)90200-3
	Not Yet Imported: - journal-article : 10.1016/S1359-6462(98)00235-8 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmst.2021.03.081 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2019.12.024 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Zhou, Mengcheng, Qin, Shuyang, Huang, Xiaoshan, Zhang, Xinfang (2023) Electrically Induced Cube ({001} < 100 >) Texture in Non-oriented Electrical Steel. Metallurgical and Materials Transactions A, 54 (7) 2858-2871 doi:10.1007/s11661-023-07064-2
	M. Hernández, F. Hernández, A. Salinas, R. Deaquino, S. Palomares, P. Cruz, A. Aragón, J. González, I. Reyes, J. Aguilar, S.L. Rodríguez, and E.J. Gutiérrez: Metall. Mater. Trans. A, 2023, vol. 55A, p. 198.
	Not Yet Imported: - journal-article : 10.2355/isijinternational.ISIJINT-2018-579 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: ISIJ International - journal-article : 10.2355/isijinternational.ISIJINT-2016-634 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Imamura, T., Hayakawa, Y., Kurosawa, M. (2003) Observation of cold-rolling texture and partially recrystallized texture in polycrystalline 3 pct Si-Fe by high-resolution electron backscattered diffraction. Metallurgical and Materials Transactions A, 34 (2). 403-408 doi:10.1007/s11661-003-0341-4
	Not Yet Imported: ISIJ International - journal-article : 10.2355/isijinternational.ISIJINT-2020-161 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Sanjari, Mehdi, Mehdi, Mehdi, He, Youliang, Hilinski, Erik J., Yue, Steve, Kestens, Leo A. I., Edrisy, Afsaneh (2017) Tracking the Evolution of Annealing Textures from Individual Deformed Grains in a Cross-Rolled Non-oriented Electrical Steel. Metallurgical and Materials Transactions A, 48 (12). 6013-6026 doi:10.1007/s11661-017-4370-9
	Not Yet Imported: ISIJ International - journal-article : 10.2355/isijinternational.45.743 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: ISIJ International - journal-article : 10.2355/isijinternational.29.809 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Mishra, S., Därmann, C., Lücke, K. (1984) On the development of the goss texture in iron-3% silicon. Acta Metallurgica, 32 (12). 2185-2201 doi:10.1016/0001-6160(84)90161-5
	Mishra, Sanak, Därmann, C., Lücke, K. (1986) New information on texture development in regular and high-permeability grain-oriented silicon steels. Metallurgical Transactions A, 17 (8). 1301-1312 doi:10.1007/bf02650111
	Matsuo, Munetsugu, Sakai, Tomohiko, Suga, Yozo (1986) Origin and development of through-the-thickness variations of texture in the processing of grain-oriented silicon steel. Metallurgical Transactions A, 17 (8). 1313-1322 doi:10.1007/bf02650112
	Böttcher, A., Lücke, K. (1993) Influence of subsurface layers on texture and microstructure development in RGO electrical steel. Acta Metallurgica et Materialia, 41 (8). 2503-2514 doi:10.1016/0956-7151(93)90331-l
	Kim, Jae Kyoum, Lee, Dong Nyung, Koo, Yang Mo (2014) The evolution of the Goss and Cube textures in electrical steel. Materials Letters, 122. 110-113 doi:10.1016/j.matlet.2014.01.166
	Not Yet Imported: - journal-article : 10.1002/srin.201800582 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2006.11.048 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.mtla.2022.101398 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.2355/isijinternational.50.264 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Acta Materialia - journal-article : 10.1016/S1359-6454(97)00111-0 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Acta Materialia - journal-article : 10.1016/S1359-6454(97)00303-0 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Acta Materialia - journal-article : 10.1016/S1359-6454(02)00271-9 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	C.G. Dunn and F. Lionetti: Trans. AIME, 1949, vol. 185, p. 125.
	C.G. Dunn, F.W. Daniel, and M.J. Bolton: Trans. AIME, 1950, vol. 188, p. 368.
	Shimizu, R, Harase, J (1989) Coincidence grain boundary and texture evolution in Fe-3%Si. Acta Metallurgica, 37 (4). 1241-1249 doi:10.1016/0001-6160(89)90118-1
	Shimizu, R., Harase, J., Dingley, D.J. (1990) Prediction of secondary recrystallization texture in Fe-3% Si by three-dimensional texture analysis. Acta Metallurgica et Materialia, 38 (6). 973-978 doi:10.1016/0956-7151(90)90169-h
	Harase, J., Shimizu, R., Dingley, D.J. (1991) Texture evolution in the presence of precipitates in Fe−3% Si alloy. Acta Metallurgica et Materialia, 39 (5). 763-770 doi:10.1016/0956-7151(91)90276-7
	Not Yet Imported: - journal-article : 10.1016/S1359-6454(03)00193-9 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.2355/isijinternational.38.553 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Giri, Sushil K., Kundu, Saurabh, Prakash, Aditya, Cicale, S., Albini, L., Samajdar, Indradev (2022) Defining the Role of Hot Band Annealing in High-Permeability Grain-Oriented (GO) Electrical Steel. Metallurgical and Materials Transactions A, 53 (5) 1873-1888 doi:10.1007/s11661-022-06643-z
	Shan, Ning, Sha, Yuhui, Zhang, Fang, Liu, Jinlong, Zuo, Liang (2016) Recrystallization Texture Transition in Fe-2.1 Wt Pct Si Steel by Different Cold Rolling Reduction. Metallurgical and Materials Transactions A, 47 (12). 5777-5782 doi:10.1007/s11661-015-2940-2
	Not Yet Imported: - journal-article : 10.1002/srin.199100451 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/S1359-6462(98)00288-7 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	H.J. Bunge: Z. Metallk, 1965, vol. 56, p. 872.
	Pawlik, K. (1986) Determination of the orientation distribution function from pole figures in arbitrarily defined cells. physica status solidi (b), 134 (2). 477-483 doi:10.1002/pssb.2221340205
	Z.H. Li, S.K. Xie, G.D. Wang, and H.T. Liu: J. Alloys Compd., 2021, vol. 888, p. 1.
	Imamura, T, Hayakawa, Y (2019) Influence of grain size before cold rolling on development of crystallographically equivalent main texture component in recrystallization texture of 3% Si-Fe. Journal of Physics: Conference Series, 1270. 12008pp. doi:10.1088/1742-6596/1270/1/012008
	Not Yet Imported: - journal-article : 10.2355/isijinternational1966.24.266 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Tetsu-to-Hagane - journal-article : 10.2355/tetsutohagane1955.85.10_751 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Okada, Tatsuya, Sakaguchi, Masaru, Ashida, Osamu, Tagami, Minoru, Inoko, Fukuji (2004) Relationship between Deformation and Recrystallization Structures in Fe-Si Single Crystal and Bicrystal Containing {111}‹112› Grain. MATERIALS TRANSACTIONS, 45 (2). 415-418 doi:10.2320/matertrans.45.415
	Duggan, B. J., Tse, Y. Y., Liu, G. L. (2010) Deformation banding and origins of rolling and annealing textures in low carbon and interstitial free steels. Materials Science and Technology, 26. 404-409 doi:10.1179/026708309x12535382371771
	Šesták, B., Zárubová, N. (1965) Asymmetry of Slip in Fe-Si Alloy Single Crystals. physica status solidi (b), 10 (1). 239-250 doi:10.1002/pssb.19650100124
	Takeuchi, S, Furubayashi, E, Taoka, T (1967) Orientation dependence of yield stress in 4.4% silicon iron single crystals. Acta Metallurgica, 15 (7). 1179-1191 doi:10.1016/0001-6160(67)90392-6
	Taoka, Tadami, Takeuchi, Shin, Furubayashi, Eiichi (1964) Slip Systems and Their Critical Shear Stress in 3% Silicon Iron. Journal of the Physical Society of Japan, 19 (5). 701-711 doi:10.1143/jpsj.19.701
	Not Yet Imported: - journal-article : 10.2355/isijinternational.34.85 If you would like this item imported into the Digital Library, please contact us quoting Journal ID

See Also

These are possibly similar items as determined by title/reference text matching only.

	Imamura, Takeshi, Shingaki, Yukihiro, Hayakawa, Yasuyuki (2013) Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3 Pct Si-Fe Steel. Metallurgical and Materials Transactions A, 44 (4). 1785-1792 doi:10.1007/s11661-012-1525-6
	Shan, Ning, Sha, Yuhui, Zhang, Fang, Liu, Jinlong, Zuo, Liang (2016) Recrystallization Texture Transition in Fe-2.1 Wt Pct Si Steel by Different Cold Rolling Reduction. Metallurgical and Materials Transactions A, 47 (12). 5777-5782 doi:10.1007/s11661-015-2940-2
	Imamura, T., Hayakawa, Y., Kurosawa, M. (2003) Observation of cold-rolling texture and partially recrystallized texture in polycrystalline 3 pct Si-Fe by high-resolution electron backscattered diffraction. Metallurgical and Materials Transactions A, 34 (2). 403-408 doi:10.1007/s11661-003-0341-4
	Shingaki, Y., Takashima, M., Hayakawa, Y. (2017) Influence of Carbon Content and Rolling Temperature on Rolling Texture in 3 Pct Si Steel. Metallurgical and Materials Transactions A, 48 (1). 551-560 doi:10.1007/s11661-016-3785-z
	Hu, Guoliang, Tang, Guoyi, Zhu, Yaohua, Shek, Chanhung (2011) Electropulsing Induced Texture Evolution in the Recrystallization of Fe-3 Pct Si Alloy Strip. Metallurgical and Materials Transactions A, 42 (11). 3484-3490 doi:10.1007/s11661-011-0770-4
	Birchall, Finn; Bishop, Catherine (2025) High-Throughput Quantification of Recrystallization Parameters for Alloy Development. Metallurgical and Materials Transactions A, 56 (8). doi:10.1007/s11661-025-07822-4
	Engler, Olaf (2025) Control of Texture and Earing in Al Packaging Sheet: A Review. Metallurgical and Materials Transactions A, 56 (7). doi:10.1007/s11661-025-07785-6
	Hosseini Mortazavi, Seyed Hossein, Mirjalili, Mostafa, Moayed, Mohammad Hadi, Barati Darband, Ghasem, Ebrahimi, Gholamreza (2025) An Extensive Study on the Hydrogen Permeation Characteristics of API 5L X70 Steel Affected by Microstructure and Texture Evoluted by Severe Cold Rolling. Metallurgical and Materials Transactions A, 56 (4). doi:10.1007/s11661-025-07707-6
	Imamura, Takeshi, Shingaki, Yukihiro, Hayakawa, Yasuyuki (2011) Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3%Si-Fe. Materials Science Forum, 702. 746-749 doi:10.4028/www.scientific.net/msf.702-703.746
	Chang, Jiaqi; Bao, Siqian; Liu, Chen; Cheng, Yuanyao; Chang, Qingming; Hu, Jiarui; Zhao, Yin; Liu, Yuxin (2025) Effect of Temper Rolling on Microstructure and Properties of Fe−3.0 Wt Pct Si Non-oriented Silicon Steel Ultra-Thin Ribbons Prepared with Planar Flow Casting. Metallurgical and Materials Transactions A, 56 (12). doi:10.1007/s11661-025-08012-y
	Choi, Chang-Hee, Lee, Dong Nyung (1997) Evolution of recrystallization texture from aluminum sheet cold rolled under unlubricated condition. Metallurgical and Materials Transactions A, 28 (11). 2217-2222 doi:10.1007/s11661-997-0179-2