Han, Gyumi; Jung, Young Hoon; Baek, Minjae; Jo, Yonghee; Park, Jeong Min; Lee, Dong Jun; Kim, Hyoung Seop; Kim, Jung Gi (2025) Effect of Direct Aging on the Mechanical Properties of Heterostructured A20X Alloy Manufactured by Laser-Powder Bed Fusion. Metals and Materials International, 31 (11). doi:10.1007/s12540-025-02028-0

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	Not Yet Imported: - journal-article : 10.1007/s11665-014-0958-z If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Current Opinion in Chemical Engineering - journal-article : 10.1016/j.coche.2020.03.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Progress in Materials Science - journal-article : 10.1016/j.pmatsci.2017.10.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Journal of Materials Research and Technology - journal-article : 10.1016/j.jmrt.2022.07.121 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmrt.2022.07.085 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Mansoura, A., Omidi, N., Barka, N., Karganroudi, Sasan Sattarpanah, Dehghan, S. (2024) Selective Laser Melting of Stainless Steels: A review of Process, Microstructure and Properties. Metals and Materials International, 30 (9). doi:10.1007/s12540-024-01650-8
	Not Yet Imported: - journal-article : 10.1016/j.matdes.2021.110008 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Advanced Engineering Materials - journal-article : 10.1002/adem.201900617 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	S. Chandra, J. Radhakrishnan, S. Huang, S. Wei, U. Ramamurty, Solidification in metal additive manufacturing: challenges, solutions, and opportunities. Progr. Mater. Sci. 148, 101361 (2025)
	T.A. Rodrigues, V. Duarte, J.A. Avila, T.G. Santos, R.M. Miranda, J.P. Oliveira, Wire and arc additive manufacturing of HSLA steel: effect of thermal cycles on microstructure and mechanical properties. Addit. Manuf. 27, 440 (2019)
	N. Shamsaei, A. Yadollahi, L. Bian, S.M. Thompson, An overview of direct laser deposition for additive manufacturing; Part II: mechanical behavior, process parameter optimization and control. Addit. Manuf. 8, 12 (2015)
	Munusamy, Sivakumar, Jerald, J. (2023) Effect of in-Situ Intrinsic Heat Treatment in Metal Additive Manufacturing: A Comprehensive Review. Metals and Materials International, 29 (12) 3423-3441 doi:10.1007/s12540-023-01462-2
	Not Yet Imported: - journal-article : 10.1016/j.matdes.2017.11.021 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Karthik, G. M., Kim, Hyoung Seop (2021) Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review. Metals and Materials International, 27 (1) 1-39 doi:10.1007/s12540-020-00931-2
	Not Yet Imported: - journal-article : 10.1080/21663831.2024.2305261 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Wang, Y. Morris, Voisin, Thomas, McKeown, Joseph T., Ye, Jianchao, Calta, Nicholas P., Li, Zan, Zeng, Zhi, Zhang, Yin, Chen, Wen, Roehling, Tien Tran, Ott, Ryan T., Santala, Melissa K., Depond, Philip J., Matthews, Manyalibo J., Hamza, Alex V., Zhu, Ting (2018) Additively manufactured hierarchical stainless steels with high strength and ductility. Nature Materials, 17 (1). 63-71 doi:10.1038/nmat5021
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2021.117311 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Kim, Jung Gi, Park, Jeong Min, Seol, Jae Bok, Choe, Jungho, Yu, Ji-Hun, Yang, Sangsun, Kim, Hyoung Seop (2020) Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy. Materials Science and Engineering: A, 773. 138726pp. doi:10.1016/j.msea.2019.138726
	Not Yet Imported: - journal-article : 10.1016/j.ijmachtools.2023.104047 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Journal of Materials Research and Technology - journal-article : 10.1016/j.jmrt.2021.04.076 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.matdes.2022.110779 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	G. Del Guercio, D.G. McCartney, N.T. Aboulkhair, S. Robertson, R. Maclachlan, C. Tuck, M. Simonelli, Cracking behaviour of high-strength AA2024 aluminium alloy produced by laser powder bed fusion. Addit. Manuf. 54, 102776 (2022)
	S. Wu, Z. Lei, B. Li, J. Liang, Y. Chen, Hot cracking evolution and formation mechanism in 2195 Al-Li alloy printed by laser powder bed fusion. Addit. Manuf. 54, 102762 (2022)
	W. Stopyra, K. Gruber, I. Smolina, T. Kurzynowski, B. Kuźnicka, Laser powder bed fusion of AA7075 alloy: influence of process parameters on porosity and hot cracking. Addit. Manuf. 35, 101270 (2020)
	Not Yet Imported: - journal-article : 10.1016/j.matdes.2020.109183 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2019.04.014 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	S.Y. Zhou, Y. Su, H. Wang, J. Enz, T. Ebel, M. Yan, Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: cracking elimination by co-incorporation of Si and TiB2. Addit. Manuf. 36, 101458 (2020)
	J. Choe, K.T. Kim, J.H. Yu, J.M. Park, D.Y. Yang, S.H. Jung, S. Jo, H. Joo, M. Kang, S.Y. Ahn, S.G. Jeong, E.S. Kim, H. Lee, H.S. Kim, A novel route for predicting the cracking of inoculant-added AA7075 processed via laser powder bed fusion. Addit. Manuf. 62, 103370 (2023)
	Fields, Brandon, Amiri, Mahsa, MacDonald, Benjamin E., Pürstl, Julia T., Dai, Chen, Li, Xiaochun, Apelian, Diran, Valdevit, Lorenzo (2024) Investigation of an additively manufactured modified aluminum 7068 alloy: Processing, microstructure, and mechanical properties. Materials Science and Engineering: A, 891. 145901 doi:10.1016/j.msea.2023.145901
	Martin, John H., Yahata, Brennan D., Hundley, Jacob M., Mayer, Justin A., Schaedler, Tobias A., Pollock, Tresa M. (2017) 3D printing of high-strength aluminium alloys. Nature, 549 (7672). 365-369 doi:10.1038/nature23894
	Yu, Jiang, Geng, Yaoxiang, Zhang, Zhijie, Ju, Hongbo (2023) Densification, Microstructural, and Mechanical Properties of Al-Mn-Mg-Er-Zr Alloy Fabricated by Laser Powder Bed Fusion. Metals and Materials International, 29 (11) 3235-3248 doi:10.1007/s12540-023-01449-z
	AMS AM Additive Manufacturing Metals, Aluminum Alloy Powder 4.6Cu-3.4Ti-1.4B-0.75Ag-0.27Mg, AMS7033 (SAE International, 2021)
	H.R. Kotadia, G. Gibbsons, A. Das, P.D. Howes, A review of laser powder bed fusion additive manufacturing of aluminium alloys: Microstructure and properties. Addit. Manuf. 46, 102155 (2021)
	Not Yet Imported: Procedia Engineering - journal-article : 10.1016/j.proeng.2012.06.013 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Belelli, F., Casati, R., Larini, F., Riccio, M., Vedani, M. (2021) Investigation on two Ti–B-reinforced Al alloys for Laser Powder Bed Fusion. Materials Science and Engineering: A, 808. 140944pp. doi:10.1016/j.msea.2021.140944
	Karimialavijeh, H., Chakraborty, A., Azzi, M., Proebstle, M., Martin, E. (2024) Effect of precipitation hardening on the microstructure, mechanical, and corrosion properties of additively manufactured A20X aluminum alloy. Materials Science and Engineering: A, 913. 147033 doi:10.1016/j.msea.2024.147033
	Not Yet Imported: JOM - journal-article : 10.1007/s11837-023-06233-3 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Materials Today Communications - journal-article : 10.1016/j.mtcomm.2023.105555 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	A. Kordijazi, D. Weiss, Effect of solidification time on microstructure, wettability, and corrosion properties of A205–T7 aluminum alloys. Int. J. Met. 15, 2 (2021)
	Not Yet Imported: - journal-article : 10.1016/j.mtcomm.2023.105804 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Avateffazeli, M., Carrion, P.E., Shachi-Amirkhiz, B., Pirgazi, H., Mohammadi, M., Shamsaei, N., Haghshenas, M. (2022) Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting. Materials Science and Engineering: A, 841. 142989pp. doi:10.1016/j.msea.2022.142989
	J. Koelblin, N. Cruchley, J. Chamberlin, M.A. Siddiq, D.M. Mulvihill, M.E. Kartal, The influence of post-thermal treatments on microstructure and mechanical properties in A20X alloy fabricated through powder bed fusion. J. Manuf. Process. 125, 93 (2024)
	Not Yet Imported: Materials & Design - journal-article : 10.1016/j.matdes.2022.111566 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Pröbstle, M., Martin, É. (2023) Direct aging of additively manufactured A20X aluminum alloy. Journal of Alloys and Compounds, 968. 172071 doi:10.1016/j.jallcom.2023.172071
	Kulkarni, Anup, Srinivasan, Dheepa, Kumar, Saurabh, Kumar, Praveen, Jayaram, Vikram (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. Journal of Materials Science, 58 (5) 2310-2333 doi:10.1007/s10853-023-08163-6
	A. Suzuki, T. Miyasaka, N. Takata, M. Kobashi, M. Kato, Control of microstructural characteristics and mechanical properties of AlSi12 alloy by processing conditions of laser powder bed fusion. Addit. Manuf. 48, 102383 (2021)
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2020.10.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	ASTM, Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M-16a (ASTM International, 2016)
	M.H. Ghoncheh, M. Sanjari, A. Shojaei Zoeram, E. Cyr, B. Shalchi Amirkhiz, A. Lloyd, M. Haghshenas, M. Mohammadi, On the microstructure and solidification behavior of new generation additively manufactured Al-Cu-Mg-Ag-Ti-B alloys. Addit. Manuf. 37, 101724 (2021)
	Clouet, Emmanuel, Laé, Ludovic, Épicier, Thierry, Lefebvre, Williams, Nastar, Maylise, Deschamps, Alexis (2006) Complex precipitation pathways in multicomponent alloys. Nature Materials, 5 (6). 482-488 doi:10.1038/nmat1652
	Dai, Ren jie, Deng, Kun kun, Wang, Cui ju, Nie, Kai bo, Zhang, Guo wei, Liang, Wei (2022) Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminum alloy. Materials Science and Engineering: A, 848. 143388 doi:10.1016/j.msea.2022.143388
	Deng, Zhichao, He, Hong, Liu, Ke, Tao, Xiong, Shang, Zhentao, Gong, Zhihui, Wang, Xinmin (2024) The influence of natural aging on the precipitation behavior of the low-alloy content Al-Zn-Mg aluminum alloys during subsequent artificial aging and related mechanisms. Materials Science and Engineering: A, 891. 145954 doi:10.1016/j.msea.2023.145954
	O. Randolph, R. Zvanut, B.L. Tai, Microstructure analysis and machinability of additively manufactured A205 aluminum with heat treatments. J. Manuf. Process. 127, 51 (2024)
	Mair, P., Kaserer, L., Braun, J., Weinberger, N., Letofsky-Papst, I., Leichtfried, G. (2021) Microstructure and mechanical properties of a TiB2-modified Al–Cu alloy processed by laser powder-bed fusion. Materials Science and Engineering: A, 799. 140209pp. doi:10.1016/j.msea.2020.140209
	G. Luo, H. Chen, Y. Li, C. Yang, L. Hu, S. Ma, H. Wang, Z. Chen, Y. Wu, M. Wang, H. Wang, Improved elevated-temperature strength and thermal stability of additive manufactured Al–Ni–Sc–Zr alloys reinforced by cellular structures. Addit. Manuf. 90, 104313 (2024)
	Wang, Wenyuan, Takata, Naoki, Suzuki, Asuka, Kobashi, Makoto, Kato, Masaki (2020) Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion. Intermetallics, 125. 106892pp. doi:10.1016/j.intermet.2020.106892
	Not Yet Imported: Acta Materialia - journal-article : 10.1016/j.actamat.2003.09.042 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.matdes.2017.09.046 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Geng, Jiwei, Liu, Gen, Hong, Tianran, Wang, Mingliang, Chen, Dong, Ma, Naiheng, Wang, Haowei (2019) Tuning the microstructure features of in-situ nano TiB2/Al-Cu-Mg composites to enhance mechanical properties. Journal of Alloys and Compounds, 775. 193-201 doi:10.1016/j.jallcom.2018.10.078
	Song, Yooseob, Kiran, Raj, Shehu, Ledia, Yeon, Jaeheum (2024) The Effect of Dynamic Strain Aging on Strengthening of AA5754 Aluminum Alloys: Theoretical and Numerical Approaches. Metallurgical and Materials Transactions A, 55 (7) 2374-2387 doi:10.1007/s11661-024-07403-x
	Zhou, Pu, Song, Yanli, Hua, Lin, Lu, Jue, Zhang, Jiaheng, Wang, Feng (2019) Mechanical behavior and deformation mechanism of 7075 aluminum alloy under solution induced dynamic strain aging. Materials Science and Engineering: A, 759. 498-505 doi:10.1016/j.msea.2019.05.071
	Curtin, William A., Olmsted, David L., Hector, Louis G. (2006) A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys. Nature Materials, 5 (11). 875-880 doi:10.1038/nmat1765
	Anjabin, N., Karimi Taheri, A., Kim, H.S. (2013) Simulation and experimental analyses of dynamic strain aging of a supersaturated age hardenable aluminum alloy. Materials Science and Engineering: A, 585. 165-173 doi:10.1016/j.msea.2013.07.038
	Cai, M, Field, D.P, Lorimer, G.W (2004) A systematic comparison of static and dynamic ageing of two Al–Mg–Si alloys. Materials Science and Engineering: A, 373. 65-71 doi:10.1016/j.msea.2003.12.035

See Also

These are possibly similar items as determined by title/reference text matching only.

	Jung, Young Hoon, Kim, Beom Joon, Kim, Hyogeon, Kim, Seong Hwan, Shin, Sang-Yun, Lee, Seok Gyu, Baek, Minjae, Lee, Dong Jun, Choi, In-Chul, Kim, Jung Gi (2025) Shot-Peening Time Effect on the Mechanical Properties of AISI 4340 Steel. Metals and Materials International, 31 (3). doi:10.1007/s12540-024-01774-x
	Lee, Yukyeong, Kim, Eun Seong, Park, Sangeun, Park, Jeong Min, Seol, Jae Bok, Kim, Hyoung Seop, Lee, Taekyung, Sung, Hyokyung, Kim, Jung Gi (2022) Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy Deposition. Metals and Materials International, 28 (1) 197-204 doi:10.1007/s12540-021-01081-9
	Kim, Jung Gi, Seol, Jae Bok, Park, Jeong Min, Sung, Hyokyung, Park, Sun Hong, Kim, Hyoung Seop (2021) Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels. Metals and Materials International, 27 (8) 2614-2622 doi:10.1007/s12540-021-00991-y
	Park, Jun Young, Kim, Beom Joon, Kim, Jung Gi (2023) Mechanical Properties of Laser-Powder Bed Fusion Processed Fe-15Cr-6Ni-6Mn Multi-phase Steel at Room and Cryogenic Temperatures. Metals and Materials International, 29 (12) 3521-3531 doi:10.1007/s12540-023-01477-9
	Kim, Jung Gi, Jang, Min Ji, Park, Hyung Keun, Chin, Kwang-Geun, Lee, Sunghak, Kim, Hyoung Seop (2019) Back-Stress Effect on the Mechanical Strength of TWIP-IF Steels Layered Sheet. Metals and Materials International, 25. 912-917 doi:10.1007/s12540-019-00258-7
	Park, Byung Ho, Um, Ho Young, Kim, Jung Gi, Jeong, Hu Young, Lee, Sunghak, Kim, Hyoung Seop (2016) Large deformation behavior of twin-induced plasticity steels under high-pressure torsion. Metals and Materials International, 22. 1003-1008 doi:10.1007/s12540-016-6279-z
	Joo, Soo Bin, No, Gun Woo, Jung, Young Hoon, Baek, Min Jae, Lee, Dong Jun, Kim, Jung Gi (2025) Scan Strategy Effect on the Mechanical Properties and Microstructure of Directed Energy Deposited 18Ni300 Maraging Steel. Korean Journal of Metals and Materials, 63 (1). doi:10.3365/kjmm.2025.63.1.1
	Kim, Jung Gi, Bae, Jae Wung, Park, Jeong Min, Woo, Wanchuck, Harjo, Stefanus, Lee, Sunghak, Kim, Hyoung Seop (2021) Effect of the Difference in Strength of Hard and Soft Components on the Synergetic Strengthening of Layered Materials. Metals and Materials International, 27 (2) 376-383 doi:10.1007/s12540-020-00657-1
	Kim, Woo-Cheol, Han, Kwon-Hoon, Kim, Jung-Gu, Yang, Seok-Jo, Seok, Hyun-Kwang, Han, Hyung-Seop, Kim, Young-Yul (2013) Effect of surface area on corrosion properties of magnesium for biomaterials. Metals and Materials International, 19. 1131-1137 doi:10.1007/s12540-013-5032-0
	Ahn, Soung Yeoul, Jeong, Sang Guk, SaGong, Man Jae, Lee, Gitaek, Kim, Eun Seong, Park, Hyojin, Cho, Jung-Wook, Kim, Jung Gi, Kim, Hyoung Seop (2024) Size matters: Exploring part size effects on microstructure, defects, and mechanical property in optimized laser powder bed fusion (L-PBF) additive manufacturing. Materials Science and Engineering: A, 902. 146616 doi:10.1016/j.msea.2024.146616
	Ahn, Soung Yeoul, Jeong, Sang Guk, Kim, Eun Seong, Kang, Suk Hoon, Choe, Jungho, Ryu, Joo Young, Choi, Dae Woon, Lee, Jin Seok, Cho, Jung-Wook, Nakano, Takayoshi, Kim, Hyoung Seop (2023) Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4. Metals and Materials International, 29 (9) Springer Science and Business Media LLC. 2760-2766 doi:10.1007/s12540-023-01400-2