Akbarzadeh Chiniforoush, Elina; Zargari, Habib Hamed; Jandaghi, Mohammad Reza; Moverare, Johan; Warsi, Reyazul; Gür, C. Hakan (2025) A sustainable strategy for wire arc additive manufacturing of high-performance duplex stainless Steel: Microstructural refinement and mechanical anisotropy reduction. Materials Science and Engineering: A, 943. doi:10.1016/j.msea.2025.148785

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	Bandyopadhyay (2018) Addit. Manuf. Invited review article: metal-additive manufacturing—modeling strategies for application-optimized designs 22, 758
	Not Yet Imported: - journal-article : 10.1007/s11665-014-0958-z If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Li (2019)
	Not Yet Imported: International Journal of Automation Technology - journal-article : 10.20965/ijat.2019.p0346 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Yazdani (2024) J. Cent South Univ. Evolution of microstructure and mechanical properties in multi-layer 316L-TiC composite fabricated by selective laser melting additive manufacturing 31, 2973
	Jandaghi (2024) Mater. Des. Exploring the efficiency of powder reusing as a sustainable approach for powder bed additive manufacturing of 316L stainless steel 244
	Dogan (2024) J. Mater. Eng. Perform. Thermal behavior in Wire Arc Additive manufacturing: a comparative study of the conventional process and infrared heater use
	Not Yet Imported: Materials Characterization - journal-article : 10.1016/j.matchar.2023.113204 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Yazdani (2024) Steel Res. Int. Fracture and wear behavior of functionally graded 316L–TiC composite fabricated by selective laser melting additive manufacturing 95
	Not Yet Imported: - journal-article : 10.1016/j.jmrt.2024.01.237 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Jafarzad-Shayan, M.M., Zarei-Hanzaki, A., Moshiri, A., Seop Kim, H., Haftlang, F., Tahaghoghi, M., Mahmoudi, M., Momeni, M., Abedi, H.R. (2023) Microstructural heterogeneity and exceptional mechanical properties in a wire-arc additively manufactured stainless steel. Materials Science and Engineering: A, 882. Elsevier BV. 145473 doi:10.1016/j.msea.2023.145473
	Jing (2024) J. Manuf. Process. Impact of process parameters on forming quality and deposition efficiency of unsupported rods in wire arc additive manufacturing 124, 12
	Williams, S. W., Martina, F., Addison, A. C., Ding, J., Pardal, G., Colegrove, P. (2016) Wire + Arc Additive Manufacturing. Materials Science and Technology, 32. 641-647 doi:10.1179/1743284715y.0000000073
	Wanwan (2020)
	Pan (2018) , 3
	Not Yet Imported: - journal-article : 10.1016/j.jmsy.2020.08.008 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Milewski (2017) vol. 258
	Shah (2023) J. Manuf. Mater. Proc. A review of the recent developments and challenges in Wire Arc Additive manufacturing (WAAM) process 7, 97
	Not Yet Imported: - journal-article : 10.3390/ma14237170 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Cao, Yang, Zhang, Yanchao, Ming, Wuyi, He, Wenbin, Ma, Jun (2023) Review: The Metal Additive-Manufacturing Technology of the Ultrasonic-Assisted Wire-and-Arc Additive-Manufacturing Process. Metals, 13 (2) 398 doi:10.3390/met13020398
	Not Yet Imported: Journal of Materials Processing Technology - journal-article : 10.1016/j.jmatprotec.2017.09.020 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.proeng.2012.07.342 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Gong, Mengcheng, Zhang, Shuai, Lu, Yang, Jiang, Laihege, Liao, Wei, Gao, Ming (2024) Achieving impressive strength and mitigated anisotropy in high-power laser-arc hybrid additive manufacturing of stainless steel through tailored microstructures composition. Materials Science and Engineering: A, 894. 146204 doi:10.1016/j.msea.2024.146204
	Cunningham (2018) Addit. Manuf. Invited review article: strategies and processes for high quality wire arc additive manufacturing 22, 672
	Jin (2020)
	Jin W Jin S Tian Y Wellmann D Liu W (2020)
	Not Yet Imported: Materials & Design - journal-article : 10.1016/j.matdes.2021.109471 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Journal of Manufacturing Processes - journal-article : 10.1016/j.jmapro.2018.08.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Dinovitzer (2019) Addit. Manuf. Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure 26, 138
	Sun, Laibo, Jiang, Fengchun, Huang, Ruisheng, Yuan, Ding, Guo, Chunhuan, Wang, Jiandong (2020) Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing. Materials Science and Engineering: A, 787. 139514pp. doi:10.1016/j.msea.2020.139514
	Palmeira Belotti, L., van Nuland, T.F.W., Geers, M.G.D., Hoefnagels, J.P.M., van Dommelen, J.A.W. (2023) On the anisotropy of thick-walled wire arc additively manufactured stainless steel parts. Materials Science and Engineering: A, 863. 144538 doi:10.1016/j.msea.2022.144538
	Not Yet Imported: Journal of Materials Research and Technology - journal-article : 10.1016/j.jmrt.2023.10.005 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1007/s40194-020-00995-z If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1007/s40194-017-0474-5 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmatprotec.2017.01.024 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Cheepu, Muralimohan, Lee, Chang Ik, Cho, Sang Myung (2020) Microstructural Characteristics of Wire Arc Additive Manufacturing with Inconel 625 by Super-TIG Welding. Transactions of the Indian Institute of Metals, 73 (6) 1475-1479 doi:10.1007/s12666-020-01915-x
	Kou (2003) vol. 431, 223
	Lippold (2015)
	Chiniforoush (2025) Mater. Des. Impact of active to inert shielding gas transition on the corrosion behavior of wire arc additively manufactured duplex stainless steel
	Xie, Yong, Gao, Ming, Wang, Fude, Zhang, Chen, Hao, Kangda, Wang, Hongze, Zeng, Xiaoyan (2018) Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V. Materials Science and Engineering: A, 709. 265-269 doi:10.1016/j.msea.2017.10.064
	Not Yet Imported: The International Journal of Advanced Manufacturing Technology - journal-article : 10.1007/s00170-019-03959-w If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.actamat.2016.05.057 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Progress in Materials Science - journal-article : 10.1016/j.pmatsci.2017.10.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Ren (2024) J. Mater. Eng. Perform. Investigation on microstructure and mechanical properties anisotropy of Inconel625 components fabricated by different frequency ultrasonic vibration-assisted CMT arc Additive manufacturing
	Not Yet Imported: - journal-article : 10.1016/j.matchar.2016.02.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Duarte (2020) Addit. Manuf. Hot forging wire and arc additive manufacturing (HF-WAAM) 35
	Not Yet Imported: - journal-article : 10.1016/j.jmatprotec.2013.04.012 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1007/s00170-019-03700-7 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Shen (2018) Addit. Manuf. The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process 23, 411
	Guo, Yangyang, Quan, Gaofeng, Celikin, Mert, Ren, Lingbao, Zhan, Yuhang, Fan, Lingling, Pan, Houhong (2022) Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing. Journal of Magnesium and Alloys, 10 (7) 1930-1940 doi:10.1016/j.jma.2021.04.006
	Elmer (2022) Addit. Manuf. Post-build thermomechanical processing of wire arc additively manufactured stainless steel for improved mechanical properties and reduction of crystallographic texture 50
	Qu, Guanda, Guo, Wei, Shi, Jiaxin, He, Dongsheng, Zhang, Yongxin, Dong, Yihao, Chi, Jiaxuan, Shen, Zhikang, Li, Ying, Chen, Zhenlin, et al. (2024) Improvement of gradient microstructure and properties of wire-arc directed energy deposition titanium alloy via laser shock peening. Materials Science and Engineering: A, 918. doi:10.1016/j.msea.2024.147422
	Xiao (2024) J. Mater. Res. Technol. Mechanical property improvement of wire-arc additive manufactured 06Cr19Ni9 steel based on ultrasonic strengthening grinding process 30, 7969
	Ge, Jinguo, Fan, Ningsong, Long, Yuhong, Lin, Jian, Lei, Yongping, Yin, Shuo (2021) Investigation on H13 buildups produced with wire arc additive manufacturing: Deposition strategies-induced microstructural evolution and mechanical performances. Journal of Alloys and Compounds, 860. 157893pp. doi:10.1016/j.jallcom.2020.157893
	Wang, Jian, Lin, Xin, Li, Jiaqiang, Hu, Yunlong, Zhou, Yinghui, Wang, Chong, Li, Qiuge, Huang, Weidong (2019) Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti 6Al 4V. Materials Science and Engineering: A, 754. 735-749 doi:10.1016/j.msea.2019.03.001
	Not Yet Imported: Manufacturing Letters - journal-article : 10.1016/j.mfglet.2021.05.011 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Chen (2022) Nucl. Mater. Energy Heterogeneous microstructure and anisotropic mechanical properties of reduced activation ferritic/martensitic steel fabricated by wire arc additive manufacturing 33
	Not Yet Imported: - journal-article : 10.1016/j.jmrt.2021.02.002 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Jing, Chenchen, Chen, Zhuo, Liu, Bin, Xu, Tianqiu, Wang, Jie, Lu, Tao, Lu, Jiping, Guo, Yueling, Liu, Changmeng (2022) Improving mechanical strength and isotropy for wire-arc additive manufactured 304L stainless steels via controlling arc heat input. Materials Science and Engineering: A, 845. 143223 doi:10.1016/j.msea.2022.143223
	Not Yet Imported: - journal-article : 10.3390/mi15040494 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmatprotec.2021.117361 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Huang (2024) J. Manuf. Process. Hybrid in-situ hot rolling and wire arc additive manufacturing of Al-Si alloy: microstructure, mechanical properties and strengthening mechanism 127, 328
	Tian, Yinbao, Shen, Junqi, Hu, Shengsun, Han, Jian, Wang, Qian, Cai, Yangchuan (2021) Effects of ultrasonic peening treatment layer by layer on microstructure of components fabricated by wire and arc additive manufacturing. Materials Letters, 284. 128917pp. doi:10.1016/j.matlet.2020.128917
	Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., Qian, M. (2020) Grain structure control during metal 3D printing by high-intensity ultrasound. Nature Communications, 11. doi:10.1038/s41467-019-13874-z
	Not Yet Imported: Journal of Materials Research and Technology - journal-article : 10.1016/j.jmrt.2022.09.055 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.msea.2021.142446 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Gordon, J.V., Haden, C.V., Nied, H.F., Vinci, R.P., Harlow, D.G. (2018) Fatigue crack growth anisotropy, texture and residual stress in austenitic steel made by wire and arc additive manufacturing. Materials Science and Engineering: A, 724. 431-438 doi:10.1016/j.msea.2018.03.075
	Not Yet Imported: - journal-article : 10.3139/146.111726 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Mashhuriazar, Amirhossein, Omidvar, Hamid, Sajuri, Zainuddin, Gur, C. Hakan, Baghdadi, Amir Hossein (2020) Effects of Pre-Weld Heat Treatment and Heat Input on Metallurgical and Mechanical Behaviour in HAZ of Multi-Pass Welded IN-939 Superalloy. Metals, 10 (11) 1453pp. doi:10.3390/met10111453
	Zhang, Liang, Wang, Songtao, Wang, Huixia, Wang, Jun, Bian, Wenzhuo (2023) Mechanical properties and microstructure revolution of vibration assisted wire arc additive manufacturing 2319 aluminum alloy. Materials Science and Engineering: A, 885. 145634 doi:10.1016/j.msea.2023.145634
	Chen, Yuhua, Xu, Mingfang, Zhang, Timing, Xie, Jilin, Wei, Kang, Wang, Shanlin, Yin, Limeng, He, Peng (2022) Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing. Journal of Alloys and Compounds, 910. 164957pp. doi:10.1016/j.jallcom.2022.164957
	Not Yet Imported: - journal-article : 10.1007/s11665-012-0207-2 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Kou, S., Le, Y. (1985) Alternating grain orientation and weld solidification cracking. Metallurgical Transactions A, 16 (10). 1887-1896 doi:10.1007/bf02670376
	Not Yet Imported: - journal-article : 10.1080/13621718.2016.1199127 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Mahajan, S., Biradar, N. S., Raman, R., Mishra, S. (2012) Effect of Mechanical Arc Oscillation on the Grain Structure of Mild Steel Weld Metal. Transactions of the Indian Institute of Metals, 65. 171-177 doi:10.1007/s12666-012-0118-9
	Not Yet Imported: - journal-article : 10.1080/09507110009549133 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY - journal-article : 10.2207/qjjws.27.32s If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Welding International - journal-article : 10.1533/wint.2005.3497 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1080/09507116.2012.753253 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Welding in the World - journal-article : 10.1007/BF03263476 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1007/s40194-017-0465-6 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	de Almeida (2019) J. Manuf. Mater. Proc. The effect of switchback parameters on root pass formation of butt welds with variable gap 3, 54
	Not Yet Imported: The International Journal of Advanced Manufacturing Technology - journal-article : 10.1007/s00170-019-03959-w If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Akbarzadeh (2024) Met. Mater. Int. Influence of shielding gas on the microstructure and mechanical properties of duplex stainless steel in Wire Arc Additive manufacturing , 1
	Not Yet Imported: - journal-article : 10.1016/j.jmapro.2021.11.036 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Charles (2010) The history of duplex developments, nowadays DSS properties and duplex market future trends , 13
	Kahar (2017) Int. J. Eng. Res. Afr. Duplex stainless steels-an overview 7, 27
	Francis, Roger, Byrne, Glenn (2021) Duplex Stainless Steels—Alloys for the 21st Century. Metals, 11 (5) 836pp. doi:10.3390/met11050836
	Not Yet Imported: - journal-article : 10.1016/j.jcsr.2018.08.031 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Patra, S., Agrawal, A., Mandal, A., Podder, A. S. (2021) Characteristics and Manufacturability of Duplex Stainless Steel: A Review. Transactions of the Indian Institute of Metals, 74 (5) 1089-1098 doi:10.1007/s12666-021-02278-7
	Not Yet Imported: - journal-article : 10.1016/j.matpr.2019.07.136 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.jmapro.2021.11.036 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: Materials Today: Proceedings - journal-article : 10.1016/j.matpr.2020.02.295 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Omiogbemi, Ibrahim Momoh-Bello, Yawas, Danjuma Saleh, Das, Atanu, Afolayan, Matthew Olatunde, Dauda, Emmanuel Toi, Kumar, Roshan, Gorja, Sudhakar Rao, Chowdhury, Sandip Ghosh (2022) Mechanical properties and corrosion behaviour of duplex stainless steel weldment using novel electrodes. Scientific Reports, 12 (1) doi:10.1038/s41598-022-26974-6
	Not Yet Imported: - journal-article : 10.1007/s00170-023-12424-8 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/S0017-9310(00)00252-0 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Mcintosh ()
	Hu, J, Tsai, H L (2008) Modelling of transport phenomena in 3D GMAW of thick metals with V groove. Journal of Physics D: Applied Physics, 41. 65202pp. doi:10.1088/0022-3727/41/6/065202
	Cho ()
	Iams, A. D., Keist, J. S., Palmer, T. A. (2020) Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys. Metallurgical and Materials Transactions A, 51 (2). 982-999 doi:10.1007/s11661-019-05562-w
	Khan, Waris Nawaz, Mahajan, Sumit, Chhibber, Rahul (2021) Investigations on reformed austenite in the microstructure of dissimilar super duplex/pipeline steel weld. Materials Letters, 285. 129109pp. doi:10.1016/j.matlet.2020.129109
	Not Yet Imported: ISIJ International - journal-article : 10.2355/isijinternational.35.969 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.matchar.2006.02.007 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	de Alencar Pires (2016) Secondary austenite precipitation during the welding of duplex stainless steels , 562
	Not Yet Imported: The International Journal of Advanced Manufacturing Technology - journal-article : 10.1007/s00170-022-08687-2 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1016/j.pmatsci.2020.100703 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Hirth, J. P. (1972) The influence of grain boundaries on mechanical properties. Metallurgical Transactions, 3 (12). 3047-3067 doi:10.1007/bf02661312
	Not Yet Imported: - journal-article : 10.1016/j.scriptamat.2004.06.002 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Dieter (1976) vol. 3
	Ritchie, Robert O. (2011) The conflicts between strength and toughness. Nature Materials, 10 (11). 817-822 doi:10.1038/nmat3115
	González-Velázquez (2018) vol. 3
	Anderson (2017)
	Not Yet Imported: - journal-article : 10.1016/j.ijpvp.2022.104877 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Brooks (2002)
	Not Yet Imported: - journal-article : 10.1016/j.mechmat.2011.07.001 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Not Yet Imported: - journal-article : 10.1179/143307508X270758 If you would like this item imported into the Digital Library, please contact us quoting Journal ID
	Chen, Jin, Qiao, Yu (2008) Characteristic length scale in cleavage cracking across high-angle grain boundary. Computational Materials Science, 42 (4). 664-669 doi:10.1016/j.commatsci.2007.10.001
	Not Yet Imported: International Journal of Fracture - journal-article : 10.1007/s10704-010-9512-7 If you would like this item imported into the Digital Library, please contact us quoting Journal ID

See Also

These are possibly similar items as determined by title/reference text matching only.

	Akbarzadeh, Elina, Yurtışık, Koray, Hakan Gür, C., Saeid, Tohid, Tavangar, Reza (2024) Influence of Shielding Gas on the Microstructure and Mechanical Properties of Duplex Stainless Steel in Wire Arc Additive Manufacturing. Metals and Materials International, 30 (7) 1977-1996 doi:10.1007/s12540-023-01623-3
	Jandaghi, Mohammad Reza, Pouraliakbar, Hesam, Shim, Sang Hun, Fallah, Vahid, Hong, Sun Ig, Pavese, Matteo (2022) In-situ alloying of stainless steel 316L by co-inoculation of Ti and Mn using LPBF additive manufacturing: Microstructural evolution and mechanical properties. Materials Science and Engineering: A, 857. 144114 doi:10.1016/j.msea.2022.144114
	Mahey, Vishal; Johnson, Grant A.; Burad, Prayag; Chulist, Robert; Collins, Peter C.; Roy, Sougata (2026) Large-scale wire arc additive manufacturing of duplex stainless steel: Comprehensive insights into microstructure and mechanical behavior. Materials Science and Engineering: A, 963. doi:10.1016/j.msea.2026.150232
	Wang, Leilei, Xue, Jiaxiang, Wang, Qiang (2019) Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel. Materials Science and Engineering: A, 751. 183-190 doi:10.1016/j.msea.2019.02.078
	Zhang, Yiqi, Wu, Shaojie, Cheng, Fangjie (2022) A specially-designed super duplex stainless steel with balanced ferrite:austenite ratio fabricated via flux-cored wire arc additive manufacturing: Microstructure evolution, mechanical properties and corrosion resistance. Materials Science and Engineering: A, 854. 143809 doi:10.1016/j.msea.2022.143809
	Duan, Xiaoming, Yang, Xiaodong (2023) Achieving enhanced strength and ductility in 316L stainless steel via wire arc additive manufacturing using pulsed arc plasma. Materials Science and Engineering: A, 867. 144711 doi:10.1016/j.msea.2023.144711
	Zhang, Hao; Zai, Le; Wang, Yun; Xue, Xiaohuai (2025) Insight into microstructural evolution and mechanical property correlations of Ti2AlNb-based alloy fabricated through wire arc additive manufacturing. Materials Science and Engineering: A, 938. doi:10.1016/j.msea.2025.148477
	Pouraliakbar, Hesam; Jandaghi, Mohammad Reza; Gallerneault, Mark; Howells, Andrew; Moverare, Johan; Fallah, Vahid (2025) Strain rate-induced crystallographic texture development in tensile deformation of a rapidly solidified thin-strip cast AA5182 Al-Mg alloy. Materials Science and Engineering: A, 945. doi:10.1016/j.msea.2025.149010
	Cheng, Jingjing; Zhang, Tianyang; Xu, Cheng; Zhang, Xiaoyong; Peng, Yong; Wang, Kehong (2026) Wire-arc additive manufacturing of Co-free maraging Steel/316L heterostructures: Microstructural evolution, interfacial strengthening mechanisms and dynamic mechanical response. Materials Science and Engineering: A, 950. doi:10.1016/j.msea.2025.149505
	Diao, Mingxia, Guo, Chunhuan, Sun, Qianfei, Jiang, Fengchun, Li, Liyu, Li, Jifeng, Xu, De, Liu, Chuanming, Song, Haolun (2022) Improving mechanical properties of austenitic stainless steel by the grain refinement in wire and arc additive manufacturing assisted with ultrasonic impact treatment. Materials Science and Engineering: A, 857. 144044 doi:10.1016/j.msea.2022.144044
	Wang, C., Liu, T.G., Zhu, P., Lu, Y.H., Shoji, T. (2020) Study on microstructure and tensile properties of 316L stainless steel fabricated by CMT wire and arc additive manufacturing. Materials Science and Engineering: A, 796. 140006pp. doi:10.1016/j.msea.2020.140006