Otto, Johannes L., Penyaz, Milena, Möhring, Kerstin, Gerdes, Lars, Schaum, Thorge, Ivannikov, Alexander, Schmiedt-Kalenborn, Anke, Kalin, Boris, Walther, Frank (2021) Microstructure, Residual Stresses, and Strain-Rate-Dependent Deformation and Fracture Behavior of AISI 304L Joints Brazed with NiCrSiB Filler Metals. Metals, 11 (4) 593pp. doi:10.3390/met11040593

See Also

These are possibly similar items as determined by title/reference text matching only.

	Penyaz, Milena, Otto, Johannes L., Popov, Nikita, Ivannikov, Alexander, Schmiedt-Kalenborn, Anke, Walther, Frank, Kalin, Boris (2021) Microstructure Influence on Corrosion Resistance of Brazed AISI 304L/NiCrSiB Joints. Metals and Materials International, 27 (10) 4142-4151 doi:10.1007/s12540-021-00974-z
	Bachurina, Diana, Vorkel, Vladimir, Suchkov, Alexey, Gurova, Julia, Ivannikov, Alexander, Penyaz, Milena, Fedotov, Ivan, Sevryukov, Oleg, Kalin, Boris (2021) Overview of the Mechanical Properties of Tungsten/Steel Brazed Joints for the DEMO Fusion Reactor. Metals, 11 (2) 209pp. doi:10.3390/met11020209
	Ivannikov, Alexander, Fedorov, Vasilii, Abramov, Anton, Penyaz, Milena, Bachurina, Diana, Uhlig, Thomas, Suchkov, Alexey, Wagner, Guntram, Morokhov, Pavel, Sevryukov, Oleg (2021) Development of Rapidly-Quenched Al-Ge-Si Filler Alloys for the Joining of Stainless Steel AISI 304 and Aluminum Alloy AA6082. Metals, 11 (12) 1926pp. doi:10.3390/met11121926
	Qin, Siyuan, Herzog, Simone, Kaletsch, Anke, Broeckmann, Christoph (2021) Effects of Pressure on Microstructure and Residual Stresses during Hot Isostatic Pressing Post Treatment of AISI M50 Produced by Laser Powder-Bed Fusion. Metals, 11 (4) 596pp. doi:10.3390/met11040596
	Ivannikov, Alexander, Abramov, Anton, Popov, Nikita, Penyaz, Milena, Suchkov, Alexey, Pukhareva, Natalia, Sevryukov, Oleg (2023) Joining Stainless-Steel AISI 304 and High-Strength Aluminum Alloy AA 6082 by Brazing Using Al-Ge-Si Foils. Metals, 13 (1) 149 doi:10.3390/met13010149
	Fedorov, Vasilii, Uhlig, Thomas, Wagner, Guntram (2023) Microstructure and Mechanical Properties of AA 6082/AISI 304 Joints Brazed Using Al-Ge-Si Filler Metal. Metals, 13 (9) 1574 doi:10.3390/met13091574
	Xiao, Zimeng; Zhou, Huiling; Lu, Sheng; Wang, Zexin; Dobuvyy, Oleksandr (2025) Microstructure and Properties of TA2 Titanium Joints Brazed with Ti–Zr–Cu–Ni Filler Metal. Metals, 15 (11). doi:10.3390/met15111218
	Buhl, Sebastian, Leinenbach, Christian, Spolenak, Ralph, Wegener, Konrad (2012) Microstructure, residual stresses and shear strength of diamond–steel-joints brazed with a Cu–Sn-based active filler alloy. International Journal of Refractory Metals and Hard Materials, 30 (1). 16-24 doi:10.1016/j.ijrmhm.2011.06.006
	de Prado, Javier, Sánchez, María, Swan, David, Ureña, Alejandro (2021) Microstructural and Mechanical Characterization of W-CuCrZr Joints Brazed with Cu-Ti Filler Alloy. Metals, 11 (2) 202pp. doi:10.3390/met11020202
	Ivannikov, A, Kalin, B, Suchkov, A, Penyaz, M, Yurlova, M (2016) Development of rapidly quenched nickel-based non-boron filler metals for brazing corrosion resistant steels. IOP Conference Series: Materials Science and Engineering, 130. 12044pp. doi:10.1088/1757-899x/130/1/012044
	Tang, Wei, Chatzidakis, Stylianos, Schrad, Caleb Matthew, Miller, Roger G., Howard, Robert (2024) Study of Mechanical Properties, Microstructure, and Residual Stresses of AISI 304/304L Stainless Steel Submerged Arc Weld for Spent Fuel Dry Storage Systems. Metals, 14 (3) 262 doi:10.3390/met14030262